HP ProCurve CLI Reference

Configurations

Show Running Configuration
    • procurve1# write terminal

Save Running Config to Startup Config
    • procurve1# write memory

Show Mac-Address, Port, and VLAN
    • procurve1(config)# show mac-address

Show Port Descriptions
    • procurve1# show name 

Show Port State & Status
    • procurve1# show interfaces brief

Show port errors and dropped packets
    • procurve1# show interfaces port

VLANs

Add Port to VLAN
    • procurve1(config)# vlan vlanID
    • procurve1(vlan-ID)# untagged port#

Remove Port from VLAN
    • procurve1(config)# vlan vlanID
    • procurve1(vlan-ID)# no untagged port#

Basic Port Commands

Disable Port
    • procurve1(config)# interface port
    • procurve1(eth-port)# disable 

Enable Port
    • procurve1(config)# interface port
    • procurve1(eth-port)# enable

Set Port Description
    • procurve1(config)# interface port
    • procurve1(eth-port)# name Laser101

Remove Port Description
    • procurve1(config)# interface port
    • procurve1(eth-port)# no name
Rating: